AI Translated

The in-lite HUB 75 transformer: The reliable base for your 12V system

The in-lite HUB 75 transformer is the new, powerful basis for the in-lite 12-volt garden lighting system. With this transformer, all your outdoor lighting can be controlled easily and safely via a simple touch interface. The transformer comes standard with a light/dark sensor and a timer, allowing the lights to turn on and off automatically at sunset and sunrise.

A unique feature of the new HUB 75 is its flexible compatibility with the optional motion detector. You can link the MOVE motion detector to one or both light zones. This allows you to decide whether all lights turn on when motion is detected, or only a specific section.

Functions of the In-lite HUB 75:

• Simple touch control

• Connect up to 75 VA of in-lite lamps

• Two cable inputs controlled simultaneously

• Manual on/off function

• Switching via the included light sensor combined with a timer

• Expandable with the MOVE motion detector (linkable to one or both lines)

How many lamps can I connect to a HUB 75 transformer?

There is no fixed number of lamps you can connect. It depends on the total VA value (installation value) of all the lamps you wish to install. The HUB 75 can handle a maximum of 75 VA. The total VA value of all connected lamps combined must stay below 75 VA.

Specialist Tip: It is wise to account for future expansions. If your current plan reaches 70 VA, there is little room left for extra lights. In that case, the in-lite SMART HUB 150 would be a better choice.

Which in-lite transformer do I need?

Unsure about the difference between the 'standard' HUB and the SMART HUBs? The table below shows the differences to help you make the right choice for your garden.

*The MOVE motion detector on the HUB 75 can be configured per line.

For large projects, the Smart Hub 300 is available. We are happy to discuss the possibilities with you first.

What is included?

When you order the HUB 75, you can get started immediately. The package contains:

• in-lite HUB 75 Transformer

• Light sensor (for automatic switching)

• 4x Cable caps for 14/2 cable

• 4x Cable caps for 10/2 cable

• Mounting materials (screws and plugs)

• Installation instructions / manual

Where to place the HUB 75 transformer?

The HUB 75 can be mounted both indoors (e.g., in a shed or garage) and outdoors. If mounting outdoors, ensure it is protected from direct precipitation (for example, under a roof cover). If this is not possible, we strongly recommend ordering the in-lite HUB PROTECTOR 1. This cover protects the transformer against dirt and moisture. The transformer must always be mounted vertically and at least 50 cm above the ground.

Note on the light sensor: Always place the included light sensor outdoors and ensure it is not influenced by artificial light (such as streetlights or car headlights) for proper operation.

Buy the In-lite HUB 75 at Gardenlightsstore.com

As an in-lite specialist, we at Gardenlightsstore.com are happy to help you find the right foundation for your garden. Check out our in-lite ground spots or outdoor spotlights to complete your lighting plan. Order your new transformer and accessories easily via our webshop. We offer free shipping Europe on orders over €100. Furthermore, you receive a five-year in-lite warranty on all fixtures.