in-lite HALO

The in-lite HALO series features modern wall lights designed to create broad, softly diffused light across walls and façades. Available with downward or up-down illumination in both 12V and 230V versions, the series combines a consistent Dark finish with a light effect that can be further shaped using compatible accessories.

Which in-lite HALO is right for your garden?

Choose your in-lite HALO based on the direction of light you want and the available power supply. DOWN models project broad, soft light below the fixture, while UP-DOWN models illuminate the wall both above and below. Both lighting effects are available for the in-lite 12V system and for a suitable mains connection.

in-lite model Light direction Power supply Key difference Best suited for
in-lite HALO DOWN Downwards 12V One broad, diffused downward beam Walls, fences, entrances, and covered outdoor areas
in-lite HALO UP-DOWN Upwards and downwards 12V Two light sources create a symmetrical effect Façades and walls where illumination above and below the fixture is preferred
in-lite HALO DOWN 230V Downwards 230V Mains-powered version with one downward beam Locations where a suitable mains connection is available
in-lite HALO UP-DOWN 230V Upwards and downwards 230V Mains-powered version with two light sources Façades and walls where symmetrical up-down lighting and a mains connection are preferred

Adjust the light effect of your in-lite HALO

The light effect of the in-lite HALO can be customised with dedicated lenses and SHUTTER accessories. The lenses change how the light is diffused, while the SHUTTER lets you narrow or widen the beam and limit stray light.

in-lite accessory Compatible with What does it change?
in-lite LENS CLEAR in-lite HALO 12V and 230V Creates a clearer, more defined light projection; included with the HALO fixtures
in-lite LENS DIFFUSE in-lite HALO 12V and 230V Creates a broader, softer light effect with less glare; included with the HALO fixtures
in-lite SHUTTER 1 in-lite HALO 12V models Adjusts the width of the light beam and helps limit stray light
in-lite SHUTTER 2 in-lite HALO 230V models Provides the same beam adjustment for the 230V HALO fixtures

Why choose the in-lite HALO series?

  • Broad, softly diffused wall lighting
    Creates a clearly defined, yet comfortable light projection across walls and façades.
  • Choice of DOWN or UP-DOWN lighting
    Use a single downward beam or create a symmetrical architectural effect above and below the fixture.
  • Customisable light projection
    Compatible accessories let you adjust the diffusion and shape of the light.
  • Available in 12V and 230V
    Choose a wall light for the in-lite 12V system or a suitable mains connection without changing the characteristic HALO design.

Buy the in-lite HALO at Gardenlightsstore.com

Explore the in-lite HALO collection at Gardenlightsstore.com. With over 20 years of experience with in-lite, our lighting specialists can help you choose the right HALO model, power supply, and compatible accessories for the light effect you want to create.

Orders over €100 qualify for free shipping across the EU, and all products come with a 5-year warranty.

Frequently asked questions

How do I make a lighting plan for my garden?

A garden lighting plan is a simple sketch that shows where every outdoor light will be installed before you buy any fixtures. A good lighting plan improves safety, highlights key features such as trees and pathways, and helps you choose the correct transformer and number of fixtures. Most gardens can be planned in five simple steps and within an hour.

Read more: How do I create a lighting plan for my garden? →

What's the difference between functional and atmospheric lighting?

Functional lighting keeps you safe; think steps, doorways, and paths. Atmospheric lighting is there to set the mood, like a tree lit from below or a soft glow near your terrace.

Can I install in-lite garden lighting myself?

Yes. The in-lite 12V system is designed for easy installation without any specialist knowledge. Using Easy-Lock connectors, most homeowners can install or expand their lighting system themselves. Always follow the installation instructions and ensure the transformer is installed in a dry, well-ventilated location.

How do I choose the right transformer for my garden lighting?

The right transformer depends on the total VA required by your garden lighting. Add together the VA rating of all the fixtures in your lighting plan and choose an in-lite transformer with sufficient capacity. Conveniently, the names correspond to their maximum VA (HUB 75 = 75 VA, SMART HUB 150 = 150 VA). Don't forget to allow some room for future expansion. This avoids the hassle of having to replace the transformer in the future.

Read more: How to install the in-lite system? →

View product: in-lite | SMART HUB 150 | Transformer →

Are all in-lite accessories compatible with every fixture?

No. Many in-lite accessories are designed for specific fixtures, product series, or system components. Always check the compatibility information on the accessory or fixture product page before ordering. If you're unsure, our lighting specialists can help you find the correct accessory for your in-lite product.

How many in-lite lights can I connect to one transformer?

There is no fixed number of in-lite lights you can connect to one transformer. The limit depends on the combined VA of the fixtures rather than the number of lights. Add together the VA of all connected fixtures and make sure the total remains below the maximum VA capacity of your HUB or SMART HUB.

How far apart should in-lite wall lights be?

For general wall and fence lighting, spacing wall lights around 1,5 to 2 metres apart is a useful starting point. The ideal distance depends on the fixture's light distribution, mounting height, and the effect you want to create. Wider spacing creates more distinct pools of light, while closer spacing produces a more continuous lighting effect.

At what height should in-lite wall lights be installed?

For general wall and ambient lighting, a mounting height of around 1,5 to 1,8 metres above ground level is a useful starting point. Low-level wall lights used for paths, steps, or orientation lighting can be positioned much lower, typically around 30 to 45 cm above the ground. Always consider the fixture's light distribution and potential glare when choosing the final mounting height.

Can I combine in-lite 12V and 230V lighting in the same garden?

Yes. You can use in-lite 12V and 230V lighting within the same lighting plan, but they use separate electrical systems. The 12V fixtures connect to an in-lite HUB and low-voltage cable, while 230V fixtures use a suitable mains connection. A 230V fixture cannot be connected directly to an in-lite 12V cable.