appliques murales extérieures in-lite

Yes. Selected in-lite wall lights can be combined with accessories that change the direction, shape, or diffusion of the light. Depending on the fixture, accessories such as the SHUTTER, WINK, LENS DIFFUSE, or LENS CLEAR can be used to refine the lighting effect. Always check which accessory is compatible with your specific fixture.

For general wall and fence lighting, spacing wall lights around 1,5 to 2 metres apart is a useful starting point. The ideal distance depends on the fixture's light distribution, mounting height, and the effect you want to create. Wider spacing creates more distinct pools of light, while closer spacing produces a more continuous lighting effect.

For general wall and ambient lighting, a mounting height of around 1,5 to 1,8 metres above ground level is a useful starting point. Low-level wall lights used for paths, steps, or orientation lighting can be positioned much lower, typically around 30 to 45 cm above the ground. Always consider the fixture's light distribution and potential glare when choosing the final mounting height.

Choose downward lighting when you primarily want practical illumination below the fixture, for example; around pathways, entrances, or terraces. Directing the light downwards helps illuminate the area where people walk while keeping the lighting effect relatively subtle. Choose an up-down wall light when you also want to emphasise the architecture of a wall or façade. The downward beam provides useful illumination below the fixture, while the upward beam adds height and creates a more pronounced architectural effect.

Functional lighting keeps you safe; think steps, doorways, and paths. Atmospheric lighting is there to set the mood, like a tree lit from below or a soft glow near your terrace.

This very much depends on the size of your garden, the number of features (walls, trees, borders, etc.), and your preferences. Most medium-sized gardens use somewhere between 8 and 15 fixtures, split between functional and atmospheric lighting. Larger gardens often need more. You can always buy a smaller amount of fixtures first to test how they look and then expand with more later.

Yes. Multiple in-lite fixtures can be connected to the same 12V ground cable. Each fixture is connected at the required position along the cable using an Easy-Lock connector. The total capacity of your lighting system (VA) must remain within the capacity of the in-lite transformer.